Asphalt compaction machines are essential for any busy contractor or home owner. They’re used for a variety of purposes, including paving, resurfacing, and even filling in cracks in the driveway. For many homeowners, the noise from an asphalt compaction machine can be a bit much. In fact, some people have started installing hamm roller warning lights to notify nearby residents before the machine starts up. What are hamm roller warning lights? They’re essentially flashing lights that are installed near an asphalt compaction machine. When they go off, this means that the machine is about to start up and may produce noise levels that are too loud for some people. If you’re wondering what these lights mean, or if you should install them on your property, read on to learn more.
What are Hamm Roller Warning Lights?
Hamm Roller Warning Lights are typically found on asphalt compaction machines. When activated, they will indicate to operators that the machine is in operation and may cause some noise.
What do they Hamm Roller Warning Lights Meaning?
When a business or home owner sees the warning lights on their asphalt compaction machine, they may be wondering what they mean. The most common light that is seen is the orange one that means the equipment is overheated. If this light is on and the machine has been working for a while, it may be time to check the seals and bearings. If there are no obvious issues, then the next most likely problem is low oil pressure. This can be caused by a clogged filter or a faulty pump. If the oil pressure is too low, it can cause damage to the engine and even stop it from working altogether.
Don’t miss this: John Deere 3025d Problems
How to know when you need to replace your hammers
If you see warning lights on your asphalt compaction machine, it means you need to replace your hammers. This is because the hammers are the only part that can break on a machine, and when they do, the entire machine will stop working.
For more information: 2010 F150 Towing Capacity Guide
What to do if you see a Hamm Roller Warning Light
If you see a red or yellow warning light on an asphalt compaction machine, it means the machine is in danger of overheating. Please take immediate action to stop the machine from continuing to operate:
- Turn off the power to the machine by turning the switch off at the main power source.
- Shut down all air compressors and stop all other operations on the machine.
- Remove any objects that may be in the path of the blades, such as pieces of concrete, rocks, stickers etc.
- Clear a space wide enough for the machine to move safely out of way.
- Slowly open each air compressor one at a time so that no sudden increase in pressure is created and avoid touching any object near either blade while doing so.
If you have a Hamm Roller and are experiencing warning lights, it is important to know what they mean. Many times, when the roller reaches a certain point of wear (e.g., from asphalt compaction), the safety sensors will start malfunctioning and emit warning lights. If you experience any of these warnings, it is important to take action immediately in order to prevent further damage or injury to yourself or your equipment.
I have experienced this problem before and have always found that the best solution is to replace the roller so that it can continue to perform its job efficiently and safely.