New Holland Dashboard Symbols

You probably don’t know all the New Holland Dashboard symbols on your tractor’s dashboard. And that’s okay! Unless you’re a mechanic or car enthusiast, there’s no need to know every single one. However, a few symbols are important to know, especially if you have a New Holland tractor.

In this blog post, we’ll review some of New Holland vehicles’ more common dashboard symbols. We’ll also tell you what they mean and what you should do if you see them. So next time you’re behind your New Holland car’s wheel, glance at your dashboard and see if you can spot any of these symbols.

Recommended article: Nissan Intelligent Key Warning Light

New Holland Tractor Dashboard Warning Lights

New Holland Tractor Dashboard Warning Lights
New Holland Tractor Dashboard Warning Lights

New Holland tractors have various dashboard warning lights that alert the operator to potential problems. Some of the most common New Holland tractor dashboard warning lights are:

  • Amber Engine Warning Light: This light indicates a problem with the engine. It could be something as simple as a dirty air filter or a more serious issue like low oil pressure.
  • Red Stop Engine Light is the most important New Holland tractor dashboard warning light. It means an engine malfunction, and the tractor needs to be shut down immediately.
  • Fuel Gauge Warning Light: This light comes on when the fuel level in the tank is low. It’s a good idea to keep an eye on this one and top off the tank before it gets too low.
  • Battery Charge Warning Light: This light indicates the battery is not charged properly. Usually, it just means that the alternator belt is loose or needs to be replaced. However, it could also indicate a more serious electrical problem.

Read also: Nissan Versa Warning Lights

What the New Holland Dash Symbols Mean

What the New Holland Dash Symbols Mean
What the New Holland Dash Symbols Mean

The New Holland Dashboard Symbols are designed to provide the operator with information at a glance. Here is a guide to what they mean:

  • The red triangle with an exclamation mark inside is the engine warning light. This comes on when there is a problem with the engine and should be checked as soon as possible. Amber oil can symbol means that the oil level is low and needs to be topped up.
  • The orange coolant symbol means the coolant level is low and needs to be refilled.
  • The red battery icon means the battery is not charging correctly and may need replacing.
  • The green transmission icon indicates that the transmission fluid level is low and needs to be topped up.
See also:  134D Hydraulic Fluid

Read also: Kia Ceed Eps Warning Light

How to Respond to the New Holland Symbols

You probably don’t know how to respond to New Holland dashboard symbols. Here’s a quick guide to help you out.

The triangle with an exclamation point inside is the master warning light. This means that there is an issue with the machine that needs to be addressed immediately.

The circle with a slash through it is the engine oil pressure warning light. This means that the oil pressure in the engine is low and needs to be checked.

The plus and minus signs’ battery icons indicate the battery charging system. If this light is on, it means that there is an issue with the battery or charging system, and it needs to be checked.

The circle with a line through it and an arrow pointing down is the hydraulic oil temperature warning light. This means that the hydraulic fluid in the machine is getting too hot and needs to be cooled down.

If you own a New Holland vehicle, it’s important to know what all the dashboard symbols mean. By familiarizing yourself with these symbols, you can quickly identify any potential problems with your vehicle and take care of them before they become serious. Do you have any other questions about New Holland vehicles? Let us know in the comments below!

See also: Caterpillar Warning Lights, Symbols and Means

FAQs About New Holland Dashboard Symbols

What do all the dashboard signals mean?

What do the different color symbols mean on a car dashboard?

Symbol lights on a dashboard typically come in different colors, each indicating a specific meaning. Red symbol lights mean a potentially serious problem or safety issue should be addressed by the vehicle’s dealer as soon as possible. Yellow/Orange symbol lights suggest that something needs to be serviced or repaired soon. Green/Blue symbol lights signal that the system is operating correctly. Drivers need to familiarize themselves with the various colors of these indicator lights so they can appropriately address any vehicular issues.

What are amber signs on the dashboard?

An amber or orange light on the car dashboard should be taken seriously, as it indicates a bigger problem. If not resolved immediately, the engine can go into a low-power mode to prevent serious damage, resulting in slower vehicle movement. These orange warnings include the engine management light and low oil level light. Having any such issues checked by a certified technician for proper diagnosis and repair is important.

Who makes New Holland tractors?

The acquisition of 80% of Ford New Holland by Fiat in 1991 marked the formation of New Holland, a conglomerate resulting from the merging four prominent companies – namely, Fiat, Ford, New Holland, and Claeys. Notably, Claeys had been acquired by New Holland back in 1964. Fast forward to the present day, it is evident that Fiat fully owns New Holland.

Which tractor is better New Holland or John Deere?

In the realm of agricultural machinery, New Holland holds a prominent position in traditional farm work, while John Deere has gained recognition for its ability to handle heavy-duty tasks. This versatile brand is well-suited for hay baling and mowing and excels at completing lighter farm work. Furthermore, it boasts superior capabilities in plowing and digging compared to its counterpart, New Holland.

Rate this post

2 thoughts on “New Holland Dashboard Symbols”

    • According to the New Holland E C 290L excavator operator’s manual, the high E/C temp is 220 degrees Fahrenheit (104 degrees Celsius). If the E/C temp reaches or exceeds this temperature, the excavator will automatically shut down.

      The E/C temp is the temperature of the engine coolant. It is important to monitor the E/C temp to prevent the engine from overheating. If the E/C temp gets too high, it can damage the engine.

      There are a number of things that can cause the E/C temp to rise, including:

      • Low coolant level
      • Clogged radiator
      • Faulty thermostat
      • Overworking the excavator

      If you notice that the E/C temp is rising, you should stop the excavator and investigate the cause. If you are unable to determine the cause, you should contact a New Holland dealer for assistance.

      Reply

Leave a Comment

×

Ask an Expert

*Follow this page every hour. We will respond to you regarding the comment you make or the question you ask.